mbr16xx, mbrf16xx & mbrb16xx series vishay semiconductors formerly general semiconductor document number 88671 www.vishay.com 03-mar-03 1 schottky barrier rectifier reverse voltage 35 to 60v forward current 16a 0.08 (2.032) 0.24 (6.096) 0.42 (10.66) 0.63 (17.02) 0.12 (3.05) 0.33 (8.38) mounting pad layout to-263ab 0.380 (9.65) 0.411 (10.45) 0.320 (8.13) 0.360 (9.14) 0.591 (15.00) 0.624 (15.85) 1 2 0.245 (6.22) min k 0.027 (0.686) 0.037 (0.940) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) k 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.140 (3.56) 0.090 (2.29) 0.110 (2.79) 0.047 (1.19) 0.055 (1.40) pin 1 pin 2 k - heatsink 0-0.01 (0-0.254) 0.060 (1.52) 0.405 (10.27) 0.383 (9.72) 0.191 (4.85) 0.171 (4.35) 0.600 (15.5) 0.580 (14.5) 0.560 (14.22) 0.530 (13.46) 0.037 (0.94) 0.027 (0.69) 0.140 (3.56) 0.130 (3.30) 0.350 (8.89) 0.330 (8.38) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.131 (3.39) 0.122 (3.08) 0.110 (2.80) 0.100 (2.54) 0.022 (0.55) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 12 pin dia. dia. pin 1 pin 2 0.676 (17.2) 0.646 (16.4) ito-220ac (mbrf16xx) to-220ac (mbr16xx) dimensions in inches and (millimeters) to-263ab (mbrb16xx) 0.154 (3.91) 0.148 (3.74) dia. 0.113 (2.87) 0.103 (2.62) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 0.160 (4.06) 0.140 (3.56) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 12 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.410 (10.41) 0.390 (9.91) 0.635 (16.13) 0.625 (15.87) 0.603 (15.32) 0.573 (14.55) pin 0.415 (10.54) max. pin 1 pin 2 case 0.370 (9.40) 0.360 (9.14) mechanical data case: jedec to-220ac, ito-220ac & to-263ab molded plastic body terminals: plated leads, solderable per mil-std-750, method 2026 polarity: as marked mounting position: any mounting torque: 10 in-lbs maximum weight: 0.08 oz., 2.24 g features ? plastic package has underwriters laboratory flammability classifications 94v-0 ? metal silicon junction, majority carrier conduction ? low power loss, high efficiency ? guardring for overvoltage protection ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? high temperature soldering guaranteed: 250?/10 seconds, 0.25" (6.35mm) from case
mbr16xx, mbrf16xx & mbrb16xx series vishay semiconductors formerly general semiconductor www.vishay.com document number 88671 2 03-mar-03 maximum ratings (t c = 25? unless otherwise noted) parameter symbol mbr1635 mbr1645 mbr1650 mbr1660 unit maximum repetitive peak reverse voltage v rrm 35 45 50 60 v working peak reverse voltage v rwm 35 45 50 60 v maximum dc blocking voltage v dc 35 45 50 60 v maximum average forward rectified current at t c = 125 ? i f(av) 16 a peak repetitive forward current at t c = 125? (rated v r , sq. wave, 20 khz) i frm 32 a peak forward surge current 8.3ms single half sine-wave superimposed i fsm 150 a on rated load (jedec method) peak repetitive reverse current at t p = 2.0 s, 1kh z i rrm 1.0 0.5 a voltage rate of change (rated v r ) dv/dt 10,000 1,000 v/ s operating junction temperature range t j ?5 to +150 ? storage temperature range t stg ?5 to +175 ? rms isolation voltage (mbrf type only) from terminals to 4500 (note 1) heatsink with t = 1.0 second, rh 30% v isol 3500 (note 2) v 1500 (note 3) electrical characteristics (t c = 25? unless otherwise noted) parameter symbol mbr1635 mbr1645 mbr1650 mbr1660 unit maximum instantaneous forward voltage (note 4) at i f = 16a, t c = 25? v f 0.63 0.75 v at i f = 16a, t c = 125? 0.57 0.65 maximum instantaneous reverse current t c = 25? 0.2 1.0 at rated dc blocking voltage (note 4) t c = 125? i r 40 50 ma thermal characteristics (t c = 25? unless otherwise noted) parameter symbol mbr mbrf mbrb unit typical thermal resistance from junction to case r jc 1.5 3.0 1.5 ?/w notes: (1) clip mounting (on case), where lead does not overlap heatsink with 0.110 offset (2) clip mounting (on case), where leads do overlap heatsink (3) screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19? (4) pulse test: 300 s pulse width, 1% duty cycle ordering information product case package code package option mbr1635 - mbr1660 to-220ac 45 anti-static tube, 50/tube, 2k/carton mbrf1635 - mbrf1660 ito-220ac 45 anti-static tube, 50/tube, 2k/carton 31 13 reel, 800/reel, 4.8k/carton mbrb1635 - mbrb1660 to-263ab 45 anti-static tube, 50/tube, 2k/carton 81 anti-static 13 reel, 800/reel, 4.8k/carton
mbr16xx, mbrf16xx & mbrb16xx series vishay semiconductors formerly general semiconductor document number 88671 www.vishay.com 03-mar-03 3 1 10 100 0 25 50 75 100 125 150 0.01 0.1 1 10 100 0.1 1 10 100 0 50 100 150 0 4 8 12 16 20 0 0.2 0.4 0.6 0.8 1.0 1.2 0.01 0.1 1 10 50 0.1 1 10 100 100 1,000 5,000 0 20 40 60 80 100 0.001 0.01 0.1 1 10 50 fig. 1 - forward current derating curve fig. 3 - typical instantaneous forward characteristics fig. 5 - typical junction capacitance fig. 2 - maximum non-repetitive peak forward surge current fig. 4 - typical reverse characteristics fig. 6 - typical transient thermal impedance case temperature ( c) average forward current (a) instantaneous forward voltage (v) instantaneous forward current (a) reverse voltage (v) junction capacitance (pf) percent of rated peak reverse voltage (%) instantaneous reverse current (ma) t, pulse duration (sec.) transient thermal impedance ( c/w) number of cycles at 60 hz peak forward surge current (a) resistive or inductive load t j = t j max. 8.3ms single half sine-wave (jedec method) pulse width = 300 s 1% duty cycle t j = 150 c t j = 25 c t j = 25 c t j = 125 c t j = 75 c mbr1635 - mbr1645 mbr1650 - mbr1660 mbr1635 - mbr1645 mbr1650 - mbr1660 mbr1635 - mbr1645 mbr1650 - mbr1660 t j = 25 c f = 1.0 mh z vsig = 50mvp-p ratings and characteristic curves (t a = 25 c unless otherwise noted)
|
